Højre loungesæt overtræk 255 x 255 H: 90/65 cm

AeroCover cover for a corner sofa with a trapeze corner. Please note, this cover has a trapeze corner and a high backrest. Measure your lounge sofa carefully. With the exact measurements, you can find the best cover for your lounge sofa. A trapeze corner is oblique, so the sofa does not have a 90-degree angle on the inside. This cover is for a dining model. This means that the backrest of the sofa is higher. The cover therefore slopes downwards.

AeroCover covers are made of RipStop polyester. This material is known for its light weight. This makes the cover easy to use, easy to fold and will not take up much space when not in use. For this, the cover is supplied in a storage bag. Furthermore, RipStop polyester is a UV-resistant, water-repellent and breathable material. This prevents condensation and mold formation. Please note, due to temperature differences within the cover, condensation is almost impossible to prevent. This requires good air circulation. Good air circulation is created by creating space between the cover and the lounge sofa. For this you will receive two free water shedding poles (RWSP) with this cover. A water shedding pole is a pole that you can place under the cover. This creates the space between the cover and the lounge sofa. In addition, this pole also provides a peak so that the water can run off the cover. This means that no puddles of water will remain on the cover.

There is a drawstring at the bottom of the cover to attach the cover. You can tighten this drawstring and secure it with the stopper. If you live in a place with a lot of wind or stormy weather, extra security is sometimes nice. You can purchase the matching sandbags from AeroCover for this. You fill these bags with sand and then attach them to the bottom of the cover. This makes the cover heavier and will not blow up.