Højre loungesæt overtræk 300 x 300 H: 90/65 cm

AeroCover protective cover for a dining corner unit. Please note that this cover is for a dining version. This means that the cover has a high back and a low front. Furthermore, this cover has a trapeze angle. This means that the angle is not 90 degrees, but slopes at two 45-degree angles. See the image for a clearer picture. This cover fits over a dining corner arrangement of up to 300 x 300 cm. Always measure your lounge sofa carefully. With the exact measurements of your lounge sofa, you can find the best cover for your lounge sofa. 

This AeroCover cover is made of RipStop polyester. This is a material that is very lightweight. This makes the cover easy to use, so it is also easy to fold and will not take up much space when not in use. For this purpose, the cover also comes in a storage bag. Besides being lightweight, RipStop polyester is also a breathable, water-repellent and UV-resistant material. This prevents mould and condensation. Please note that condensation is almost impossible to prevent due to temperature differences inside the cover. This requires good air circulation within the cover. This occurs when there is enough space between the cover and the lounge sofa. You create this by placing the two free water shedding poles (RWSP) you get with this cover under the cover. A water shedding pole is a pole that provides the space between the cover and the lounge sofa. Moreover, with the water shedding poles, you create slope. Rainwater will run off the cover and there will be no puddles of water on the cover. 

At the bottom of the cover is a drawstring to attach the cover. You can pull the cord and secure it with the stopper. If you live in a windy or stormy area, extra fastening is nice. For this, you can buy the matching AeroCover sand bags. Fill them with sand and attach them to the bottom of the cover. This makes the cover heavier and prevents it from blowing up.